Home - Return to Previous Page
Additional Images

65 - 66 Mustang Electric Power Steering Conversion Kit with Ididit Tilt Column

(0) Reviews: Write first review
UAP-656-ESK

1965 - 1966 Mustang Electric Power Steering Conversion Kit with new Ididit Column

Are you fighting to turn your wheel and have vague steering on the highway? Drastically improve your steering with this electric power steering conversion kit for 1965 and 1966 Mustangs! This kit will eliminate the need for a factory power ram, valve and power steering pump that is not adjustable and tend to leak. This electric assist conversion kit will allow you to adjust the level of assist and give your Mustang power steering for much improved driving experience. The steering column included in this package is an 8 Position Tilt IDIDIT Column with the 1965 - 66 Mustang Ford Specific Turn Signal Switch and top shaft. So the turn signal wiring will plug into your stock under dash wiring and you can use a stock 1965 - 66 Mustang steering wheel or an aftermarket steering wheel with the Ford Mustang Adapter. The New IDIDIT Steering column is built to accept the EPAS electric power steering unit the installation is much easier with no modifications to the column needed! The column options below allow you to choose your Steering Column Finish.

Sold as KIT

Was: $2,210.95
Sale: $2,110.95
Save: 5%
Save: $100.00

Customize Your Item

- Choose Steering Column Finish -
 * required
- Steering Hook-Up -
 * required
- Steering Shaft Size -
 * required
Qty:
FREE SHIPPING on orders *$199 or more

Special Notes

You can modernize your classic cars steering with this power steering conversion kit. It works great for Mustangs with limited engine space due to the fact that the entire unit mounts inside the vehicle, under the dash! It will also work with rack and pinion conversions with the correct U-Joint Adapter for the rack.

Kit Includes:

  • 45 Amp Electric Power Steering Motor
  • Electronic Control Box
  • Firewall Plate for Steering Shaft Support with Bearing
  • Steering Shaft U-Joints
  • Wiring Harness
  • On/Off Switch
  • Potentiometer to Adjust the Amount of Steering Assist
  • Features a low 9 Amp Draw
  • Average Install Time: 10 Hours

The motor includes an internal computer that measures the amount of effort applied to the steering wheel and amplifies it with the aid of the motor. The included potentiometer can be mounted within an arms distance to allow you to adjust the amount of assistant desired. With the twist of a knob you can adjust your desired assist level so you can have maximum assist in the parking lot and less assist on the highway for instance.

This kit works with BOTH Manual and Power Steering, but we recommend it more for a manual set up. Installation is only for the professional with steering system experience as cutting, drilling, tapping and wiring required if using your original steering column.. Modifications to the steering are required even though it is made to work with the factory steering column. The steering shaft will need to be cut near the steering box to install the included steering shaft. Upgraded electrical is not required and the Electrical wiring is pretty plug and play except for the required power source and ground. Since all parts are located under the dash it makes for a clean install.

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 20.0 lbs.
  • W12.0000” x H8.0000” x L24.0000”
  • FREE SHIPPING on orders *$199 or more
  • This item ships in its own box.

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.