64 - 70 Mustang RideTech Bolt - On 4-Link Rear Suspension Kit

SKU: RTS-12087197

1964 - 1970 Mustang Ride Tech Bolt-On 4-Link Suspension

The Ridetech Bolt-On 4-Link installs onto the OEM leafspring mounts of your prized Mustang, 4 small tabs to weld to the axle for your upper bars. The ride height is typically lowered by approx 2" and the ride quality is drastically improved over stock. This kit now includes the upgraded R-Joint Rod ends on upper and lower control arms for improved performance and articulation at the connecting end!

Sold as KIT

Was: $1,995.00

Sale: $1,949.00

Save: 2%

Save: $46.00

Customize Your Item

The U-Bolt Mounts Included with the kit will work with the stock leaf spring platforms on the stock 9-inch axle housing. If you have a newer 9 Inch housing with 3-Inch Outer Diameter tubes the Optional weld-on axles housing brackets can be used for more strength. The weld-on brackets will NOT use the leaf spring perches.

Select Your Axle Housing Bracket

- Select Your Axle Housing Bracket -

* required

Add Coil Over or Shockwaves

- Add Coil Over or Shockwaves -

* required

Qty:

FREE SHIPPING on orders *$199 or more

Special Notes
R-Joint Video
Details
Shipping
Reviews

Special Notes

PLEASE NOTE: Coil Overs or ShockWaves not included but we recommend getting them! HQ Coil Overs (RTS-12106510) OR HQ ShockWaves (RTS-21150701).

The Ridetech Bolt-On 4-Link installs onto the OEM leafspring mounts of your prized Mustang, just 4 small tabs to weld to the axle for your upper bars. The ride height of your car is typically lowered by approximately 2 inches. The ride quality is dramatically improved over stock

Do you want your Classic Mustang to drive like a modern performance vehicle get this Bolt-On 4-Link as it's the perfect solution! The system eliminates the OEM leafspring and replaces them with a 4 link rear suspension. The 4 link bars offer more precise positioning of the rear axle to eliminate flexing and increase stability through the corners. When combined with a ShockWave or a Ridetech Coil-Over front suspension kit your classic Mustang can now enjoy the benefits of modern handling and ride quality technology.

4-Link Features:

Lowers vehicle ride height

Mounting hardware to maintain ground & tire clearance, driveline angles, and load capacities

Bolt-on installation to the bottom of the car (no fabrication required to your frame rails or floor)

Greatly improved handling performance (Keeps rear end centered through the corners and helps to eliminator or greatly reduce
wheel hop.

Ability to lower the rear with adjustable coil-over shocks or Shockwave Air Suspension

Ultimate ride quality

Now comes standard with revolutionary R-Joint Ends on both upper and lower control arms for better articulation and double adjustabel ends!

New R-Joint Features:

R-Joints are a revolutionary rod end design that provides low friction, full range articulation, long service life, lateral stability and quiet operation.

-- Articulates in 3 planes 360 degree axial rotation and 30 degrees of total lateral rotation.
-- 17-4 investment cast stainless steel housing with rolled threads.
-- Polished stainless ball and RTX10 composite cage provides consistent low friction movement.
-- Special RTX10 composite cage needs NO lubrication.
-- Self cleaning design…movement not affected by ANY water, grit, dirt, or debris.
-- Spring loaded closure keeps mechanism tight and rattle free for LIFE!

See video tab for a short video about the features and benefits of this new arm end.