1964 - 68 Mustang Fuel Tank for EFI Conversions, 200 LPH Electric Pump In Tank
AER-18698
16 Gallon Mustang Stealth Gas Tank for EFI Conversion, 200 LPH In Tank Pump
64 65 66 67 68 New Classic Mustang EFI fuel tanks feature a pre-installed, in-tank 200 Stealth Fuel Pump and complete, in-tank performance baffling.These tanks make EFI conversions and a late model EFI engine swap a snap. Perfect for Naturally aspirated EFI/Coyote Engine conversions with approximately 450 - 500 Horsepower. See below for more info and about RACE ONLY Application.
Sold as KIT
Shipping: This item ships in an oversize box. Flat Rate Shipping Applies.
Pricing:
$988.95
Product Video
Special Notes
These Aeromotive 1964-68 1st Gen Mustang Stealth fuel tanks feature an Aeromotive 200 Stealth electric fuel pump mounted to a billet aluminum, black anodized hanger assembly. The 200 Stealth electric fuel pumps 200 lph flow and use a turbine pump mechanism for increased durability and performance. It is best to go with an tank like this that has the electric fuel pump internally mounted. An external fuel pump will produce extra noise that will transfer into the passenger compartment and add additional clutter under the car.
The 1964-68 Mustang Stealth fuel tanks also features an innovative baffling/tray system to control fuel slosh and keep the 200 Stealth fuel pump submerged ensuring consistent pump performance even at low fuel levels and extreme driving conditions. The tanks include a Ford 73-10 ohm sending unit that comes pre-installed, pre-pump filter sock, internal return line tubing, and three AN ORB ports?one for the feed line, one for the return line, and one for the vent. For extra protection, the tanks are silver powder coated for maximum durability.
The 1964-68 Mustang Stealth fuel tanks also features an innovative baffling/tray system to control fuel slosh and keep the 200 Stealth fuel pump submerged ensuring consistent pump performance even at low fuel levels and extreme driving conditions. The tanks include a Ford 73-10 ohm sending unit that comes pre-installed, pre-pump filter sock, internal return line tubing, and three AN ORB ports?one for the feed line, one for the return line, and one for the vent. For extra protection, the tanks are silver powder coated for maximum durability.
Technical Notes
Mustang Stealth Fuel Tanks Feature:
Stamped Steel Fuel Tank fits 1964-1968 Ford Mustangs
Silver Metallic Painted finish
EFI-style internal baffling
73-10 Ohm Universal Fuel Level Sending Unit
Bolt-On Flanged Filler Neck Adapter
60 degree Universal Rubber Filler Neck
Black Anodized Aluminum Pump Hanger Assembly
200 Stealth Fuel Pump (200 LPH Flow)
Pre-Pump Filter Sock Assembly
(3) ORB-06 Ports - Outlet, Return and Vent
Tank Has a 16 Gallon Capacity
200 Liter Per Hour Pump Flow Works well with 450 - 500 Horsepower naturally aspirated Coyote Engine Swaps or 5.0L EFI Conversions/Swaps.
200 Liter Per Hour Pump Flow Works well with 450 - 500 Horsepower naturally aspirated Coyote Engine Swaps or 5.0L EFI Conversions/Swaps.
If running a Higher horsepower engine, we recommend the 340 LPH 340 Series Stealth Fuel tank (Part # AER-18697)
EPA Warning
WARNING: This is a RACE ONLY product manufactured and sold for installation on vehicles to be used solely for competition purposes, which, once installed, may never be used, or registered or licensed for use upon a public road or highway. If you install this part on your vehicle and use that vehicle on a public road or highway, you will be considered in violation of the Clean Air Act and personally subject to a civil penalty of $4,454.
AER-18698
Clean Air Act Title II Section 203 Code 7522(a)(3)
(A) for any person to remove or render inoperative any device or element of design installed on or in a motor vehicle or motor vehicle engine in compliance with regulations under this subchapter prior to its sale and delivery to the ultimate purchaser, or for any person knowingly to remove or render inoperative any such device or element of design after such sale and delivery to the ultimate purchaser; or
(B) for any person to manufacture or sell, or offer to sell, or install, any part or component intended for use with, or as part of, any motor vehicle or motor vehicle engine, where a principal effect of the part or component is to bypass, defeat, or render inoperative any device or element of design installed on or in a motor vehicle or motor vehicle engine in compliance with regulations under this subchapter, and where the person knows or should know that such part or component is being offered for sale or installed for such use or put to such use.
AER-18698
Clean Air Act Title II Section 203 Code 7522(a)(3)
(A) for any person to remove or render inoperative any device or element of design installed on or in a motor vehicle or motor vehicle engine in compliance with regulations under this subchapter prior to its sale and delivery to the ultimate purchaser, or for any person knowingly to remove or render inoperative any such device or element of design after such sale and delivery to the ultimate purchaser; or
(B) for any person to manufacture or sell, or offer to sell, or install, any part or component intended for use with, or as part of, any motor vehicle or motor vehicle engine, where a principal effect of the part or component is to bypass, defeat, or render inoperative any device or element of design installed on or in a motor vehicle or motor vehicle engine in compliance with regulations under this subchapter, and where the person knows or should know that such part or component is being offered for sale or installed for such use or put to such use.
Details
- AER-18698
- AER-18698
- Miscellaneous
- New
Shipping Information
- Item Requires Shipping
- 31.0 lbs.
- W22.0000” x H10.0000” x L41.0000”
- $49.00
- This item ships in its own box.
- This item ships in an oversize box. Flat Rate Shipping Applies.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!