64 - 73 Mustang TCP Panhard Bar Kit, with Sway Bar for Leaf Spring Suspension

Features and Benefits of Total Control Products Panhard Bar Kit with Anti-Roll Bar: 

Panhard Bar
Our Panhard bar system for leaf-spring suspensions greatly improves vehicle handling response. It provides superior control over the side-to-side movement of the rear end housing. Installation and proper setup provide a noticeable change in vehicle handling with a more direct and connected feel during cornering. Minimizing the nervous tendencies of leaf spring suspensions with the TCP Panhard bar makes driving near the vehicle?s performance limit much easier.

Adjustable Geometry
Multiple mounting holes for each end of the Panhard rod allows the system to be used at multiple ride heights and provides adjustment of the vehicle roll center. Altering the roll center affects the understeer and oversteer characteristics of the car and is a quick and easy method to achieve better handling performance. Expect a noticeable improvement in cornering stability and more linear motion when transitioning into and out of turns. When adjusting bar height, both ends must be raised or lowered the same number of holes to maintain the bar's levelness.

Adjustable Anti-Roll Bar Kit

The sliding-link anti-roll bar features a 5/8”-diameter, solid bar with chassis mounts that are integrated into the Panhard bar frame brackets and housing mounts that are located on the Panhard bar leaf spring plates. The anti-roll bar mounts to the frame with Billet Aluminum bushing housings which feature grease zerk fittings and black polyurethane performance bushings that feature internal grease passages to keep them lubricated. The unique sliding link adjustment at the end of the bar uses three distinct indents to create six incremental adjustments to bar stiffness. The CNC machined clevis locks into each indent by a set screw and jam nut, preventing unintended sliding or twisting of the assembly. Links have 3/8 Inch rod ends allowing the anti-roll bar to be precisely set to a neutral non-preload condition. 

Product Features:

• Effectively Controls side-to-side axle housing movement 
• Improves cornering stability because axle housing is kept centered under the car
• Produces Predictable and consistent handling characteristics
• Multiple verticle mounting points allows adjustable roll center geometry
• Anti-Roll Bar Kit which includes adjustable end links with sliding end link adjustment for adjustable roll bar stiffness. 
• Integrated anti-roll bar mount with leaf spring plates, shock mounts, and tie-down loops